Product Decorations

There are options for product decorations to choose from, which is color matching, lable/sticker, spraying, electroplating, silk screen printing, hot stamping/foiling, embossing.

We understand the need to get creative with your final product packaging design. Please view more details below to have a better idea of what fit your needs. 

 

Color Matching

 

The color matching is mainly for the plastic bottle, jar, dispenser, and cap. The color pigment is added to the plastic raw material before production. All we need is a color chip, an actual sample, or a pantone number to match the desired color. For each batch of production, the color might be slightly different. 

Color matching
Spraying

Spraying

Spraying takes a glass/aluminum product and adds the color coating to the surface. It is widely used in glass bottle/jar and aluminum bottle/tin as the color of these products are simple and few. 

To start the spraying, the products must be cleaned tidily so that no dust or stain is on the surfacce, then a base clear lacquer oil coating is baked on to the product to ensure the stability of the spraying color before placing inside the vacuum chamber, and the surface color spraying coating immediately to provide a wide range of beautiful color like red, pink, green, blue, and more. 

For each batch of production, the color might be slightly different. 

Electroplating

Electroplating takes a plastic/aluminum/glass product and adds a metallic coating to the surface. 




To start the electroplating, the products must be cleaned tidily so that no dust or stain is on the surface, then a base clear lacquer oil coating is baked on to the products to ensure the stailibilty of the electroplating color before placing inside the vacuum chamber. Then a charge containg pure aluminum is passed through tungsten filaments. 

The finished product is colored to provide a range of luxury metallic finishes, which is available in gold, silver, red, green, blue and more in either vanish or glossy finish. 

For each batch of production, the color might be slightly different. 

electroplating
silk screen printing

Silk Screen Printing

Silk screen printing is widely used in glass bottle/jar, plastic bottle/jar, aluminum bottle/tin and more. It is a 3D effect and you can feel it with your hands. 

Before silk screen printing, we need to make a screen composed of mesh and silk that are stretched over a wooden frame. The ink will be poured in one side of the mesh and a scraper will move at a constant speed and take pressure on the mesh, then the ink will pass through to the products via the mesh. To get a multi-colored printing, several screens and passes are used, hence the cost is charged by the color and pass. 

For each batch of production, the printing color might be slightly different. 

Hot Stamping/ Foiling

Hot stamping is to add a gold, silver, red, green texts and more to a surface. Normally simple texts and designs can be printed directly onto the plastic bottle/jar, aluminum bottle/jar, and glass bottle/jar. 

Before hot stamping, a metallic blocks with the desgins etched on the surface is made. The product is placed under the block and the color film on top,  then the hot foil machine applies the pressure and heat to the metallic block, the design can be imprinted to the product with the glossy or matt finish. 

The hot stamping printing can reflesh a luxury metallic finish, and the cost is charged by the printing area. 

Hot stamping

New Product Alert

ExcellPack will only notify you by email when a new product is launched, we won’t send you any email at other time.